LOKKR LOKKR-AU133 Creality Fan Set Axial Blower Fo K1 24V 3010 4020

( Brand: Lokkr ), ( Manufacturer Part Number: LOKKR-AU133 ), ( Part Type: Fan Blower )

Review LOKKR Creality Original K1 Fan 24v Set 2pcs Axial And Blower Fo

The LOKKR Lokkr-AU133 Creality K1 Fan is a high-performance axial fan designed specifically for use with 3D printers and other similar applications. This fan, model number AU133, is compatible with Creality K1 printers and is also suitable for other 24V fan setups.

The fan measures 200mm in diameter and utilizes eight 3010 high-speed propeller blades, which have a length of 150mm. These blades are made of durable and lightweight PC material, ensuring excellent airflow with minimal vibration.

The motor powering the fan is a powerful 24V unit capable of delivering an impressive airflow rate of up to 44.3 cubic feet per minute (CFM) and a maximum air pressure of 2.22 pascals. This performance ensures efficient cooling for your 3D printer or heatbed, enabling optimal printing conditions for various materials and designs.

The fan comes with a mounting kit and includes both long and short screws to accommodate different printer setups. The fan frame and mounting screws are made of aluminum, providing both durability and heat dissipation properties.

The wiring harness of the fan is designed with two crimped 3-pin JST connectors, making installation straightforward and secure. The heat-resistant sleeving of the wires adds an extra level of protection against the heat generated during operation.

The LOKKR Lokkr-AU133 Creality K1 Fan has an efficient operation with a noise level of only 35dB (A), which is relatively low for such a powerful fan. This quiet operation not only makes for a more enjoyable printing experience but also keeps the noise levels down in your workspace.

With its impressive airflow, quiet operation, and easy installation, the LOKKR Lokkr-AU133 Creality K1 Fan is an excellent addition to your 3D printing setup, ensuring consistent and reliable cooling performance for your printer.

Lokkr Lokkr-au133 Creality K1 Fan 24V Set: An In-depth Analysis

The Lokkr Lokkr-au133 Creality K1 Fan 24V Set 3010 Axial 4020 Blower Fan is a popular choice among 3D printers due to its high efficiency and durability. In this analysis, we will explore the pros and cons of this fan to help you make an informed decision.

1. High Air Flow: The Lokkr-au133 fan boasts a high air flow of up to 3000 RPM, ensuring optimal cooling for your 3D printer.

2. Compatibility: This fan is compatible with numerous 3D printer models, including Creality's K1, CR-10, CR-10S, CR-10S PRO, Ender 3, and i3.

3. Durable Construction: The fan features a sturdy aluminum frame that ensures longevity and stability. The fan blades are made of high-quality PP material, guaranteeing resistance to wear and tear.

4. Easy Installation: This fan is easy to install, as it comes with screws, couplers, and mounting plates for various 3D printer models.

5. Energy-efficient Design: The 24V voltage provides powerful air flow while keeping power consumption low, helping save energy and reduce operating costs.

1. Limited Speed Control: The fan does not have built-in speed control; therefore, users may need an additional external controller to adjust its speed, which will incur additional costs.

2. Noise Level: While the fan's air flow is impressive, it can produce a moderate amount of noise, which may be bothersome for some users during prolonged printing sessions.

3. No Bearings: The fan uses a sleeve bearing design, which may require more frequent maintenance and replacement compared to fans with ball bearings.

The Lokkr Lokkr-au133 Creality K1 Fan 24V Set offers several advantages, such as high air flow, compatibility, durability, and ease of installation. However, it comes with some downsides, including limited speed control, noise production, and the requirement for more frequent maintenance.

If you prioritize a high air flow fan for your 3D printer and don't mind some additional noise or the need for an external speed controller, the Lokkr Lokkr-au133 Creality K1 Fan 24V Set could be an excellent choice. Alternatively, if you want a quieter fan or one with built-in speed control, consider models with those features.

Note: Before making a purchase, ensure compatibility with your specific 3D printer model and consult user reviews for the most accurate information.

Details:

Axial Fan 3010 24V 0.1A 12000 10% L40 1.25-3PFits for K1C/K1 Max/K1 Blower 4020 0.3A 12k L60 1.25-4P Fits forK1C/K1 Max Packing List. Package included: 3010 Axial Fan and 4020 Blower. Manufacturer: Lokkr. Material: Plastic.

Brand: Lokkr. Country of Origin: China. Creality Original K1 Fan 24v Set 2PCS, 3010 Axial and 4020 Blower for 3D Printer K1/K1C/K1 Max/K1 SE:: Set 2PCS Strong Wind Force Low Power Consumption Excellent Cooling System Multi Blades with Fluid Design Specifications: Materials: Plastic Bearings: Oil-bearing Operation voltage :DC 24V 100%.

specifications casefahea:

• brand: Lokkr
• mpn: Lokkr-au133
• part type: Fan Blower

shipping casefahea:

• carrier: UPS
• service: UPS Ground Saver, UPS Ground
• transit: 6-10 Days
• cost: $6.89
• class: Economy, Standard
• type: Calculated

payments casefahea:

• wallet: Google-pay
• credit card: Discover
• other

seller casefahea:

• rating: 100.0%
• city: Chicago, Illinois
• # reviews: 39

offer casefahea:

• started: January 28, 2025
• availability: In Stock
• options: Ship-to-home
• quantity: 1
• sold: 0

general casefahea:

• Computer Components Parts > Fans, Heat Sinks Cooling > Computer Case Fans
• condition: New

returns casefahea:

• method: Money back
• time: 30 Days
• policy: Returns Accepted
• paid by: Seller